Filter
Top Products
Setting Options Description
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Communication from the
HDBaseT port (PowerLite Pro
G6750WU/G6800/G6900WU)
HDBaseT Control Communications When the projector is connected
to the HDBaseT Transmitter,
(PowerLite Pro
enables or disables
G6750WU/G6800/G6900WU)
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's LAN, RS-
232C, and Remote ports
165