Filter
Top Products
Setting Options Description
High Altitude Mode — Regulates the projector’s
operating temperature at
altitudes above 4921 feet (1500
m)
BNC Sync Termination — Sets the termination for the signal
from the BNC port (normally
should be off unless analog
termination such as for switchers
is necessary)
Remote Control Type Normal Select Normal to use the remote
control that came with the
Simple
projector or Simple to use a
different Epson projector remote
control (selecting Simple
disables the remote control that
came with the projector)
Inv Direction Button — Enable this setting if the projector
is installed on a ceiling and you
want to invert the arrow buttons
on the control panel
Startup Source Search — Automatically detect the image
signal being input when the
projector is turned on
A/V Mute Release A/V Mute Select A/V Mute if you want to
use only the A/V Mute button to
All
turn off A/V mute or select All to
use any button to turn it off
Beep — Turns on or off the beep that is
played when the projector turns
on or off
Lens Type ELPLU01 Select ELPLU01 when the
optional short throw lens
Others
(ELPLU01) is attached;
otherwise leave this setting at
Others
168