Filter
Top Products
4. Rotate the distortion ring until the area around the edges of the image is also focused.
5. Rotate the focus ring again to focus the entire screen image.
6. If the area around the lens projection axis is out of focus, rotate the distortion ring again to bring the
area into focus.
Note: When using the short throw lens, make sure ELPLU01 is selected for the Lens Type setting in the
Extended menu so that keystone adjustments are performed correctly. If the image has shifted after
making adjustments, re-position the image using lens shift. When adjusting the image height, position
the image lower than where you want it to be and then move it up using the vertical lens shift dial. This
will help prevent the image from moving down after adjustment.
Parent topic: Focusing the Image Using the Focus Ring
Related tasks
Adjusting the Image Position Using Lens Shift
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 49 feet (15 m)
away. You can point it at the front or rear of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
112