Filter
Top Products
Changing Settings Using a Web Browser (Web Control)
127
Changing Settings Using a Web Browser (Web Control)
You can make Configuration menu settings and control the projector by
using the Web browser of a computer that is connected to the projector
via a network. Setup and control operations can be performed remotely
if this function is used. In addition, you can use the computer's keyboard,
so it is easier to enter characters needed for setup, such as certificate
settings.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using
a Mac OS, use Safari or Firefox.
q
• When communicating with a wireless LAN, connect in Advanced mode.
s p.74
• Setup and control with a Web browser are possible if Standby Mode is set
to Communication On from the Extended menu of the projector's
Configuration menu, even if the projector is in standby state (when the
power is off). s p.67
Displaying Web Control
Use the following procedure to display Web Control.
q
• If your Web browser is set up to connect via a proxy server, Web Control
cannot be displayed. To use Web Control, you need to make network
connection settings with a device other than a proxy server.
• When setting the security using Web Control, we recommend setting
Secure HTTP to On. s p.82
Procedure
A Start the Web browser on the computer.
B Enter the IP address of the projector in the address field of
the Web browser, and press the [Enter] key on the
computer's keyboard.
Web Control is displayed.
When Web Control Password is set in the Network menu from the
projector's Configuration Menu, enter the password. Enter EP-
SONWEB as the user name. Enter the characters set for the web
control password as the password. The default password is admin.
Displaying Web Remote
The Web Remote function allows you to perform projector remote
control operations from a Web browser.
Procedure
A Display Web Control. s "Displaying Web Control" p.127
B Click Web Remote.
Example: Web browser of a computer