Filter
Top Products
Network Menu
75
SSID Enter an SSID. When an SSID is provided for the wireless WLAN network in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Search Access Point When Connection Mode is set to Advanced, you can search for surrounding access points, and set the SSID to be connected from
those access points. Depending on the access point settings, they may not be displayed in the list. You must set security separately.
s p.76
Channel You can select the channels used to connect in Quick mode. If interference from other signals occurs, use a different channel.
SSID Display To prevent the SSID from being displayed on the LAN Standby screen, set this to Off.
DHCP You can set whether or not (On/Off) to use DHCP
g.
If this is set to On you cannot set any more addresses.
IP Address You can input the IP address
g assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask You can input the Subnet Mask
g for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses
g cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
IP Address Display To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
Region Code This is a specific string of the wireless LAN module.
Sub Menu Function