Filter
Top Products
Saving a User's Logo
43
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
The saved user's logo can be used as the display image when there is no
video signal input or during starting up.
q
Once a User's Logo has been saved, the logo cannot be returned to the
factory default.
Procedure
A Project the image you want to use as the User's Logo, and
then press the [Menu] button.
B Select Extended - "User's Logo" from the configuration
menu. s "Using the Configuration Menu" p.55
q
• If User's Logo Protect from Password Protect is set to On, a message is
displayed and the user's logo cannot be changed. You can make changes
after setting User's Logo Protect to Off. s p.45
• If User's Logo is selected when keystone, E-Zoom, or Aspect are being
performed, the function currently being performed is cancelled.
C When "Choose this image as the User's Logo?" is displayed,
select "Yes".
q
When you press the [Enter] button on the remote control or the control
panel, the screen size may change according to the signal as it changes to
the resolution of the image signal.
Using the Remote Control Using the Control Panel