Filter
Top Products
Table of Contents
Quick Reference Guide 4-5
Controls and Features 6-1
1
• Power 6
• Power-On Indication
6
• Volume Control 6
• Mute/AutoMute 6-7
• Sensitivity 7
• Marking Locations 8
• Safety Camera Data 9
• Auto Learn / Auto Unlearn 9
• Locking Out False Alarms 9
• Audible Alerts 9
• Voice Announcements 10
• Display Brightness 10
• Signal Strength Meter 10
• ExpertMeter 11
Preferences 12-16
• How to use Preferences 12
• Example of Preferences 12
• Overview of Preferences 13
• Details of Preferences 14-16
Technical Details 12-25
• Specifications 17
• Interpreting Alerts 18-19
• How Radar Works 20
• How “POP” Works 21
• How Laser Works 21
• How GPS Works 22
• How TotalShield™ Works 22
• How TrueLock Works 23
• How AutoLearn Works 23
• How Safety Radar Works 24-25
Service 26-33
• Troubleshooting 26-2
7
• Service 28
• Warranty 29
• Registration 31-32
32
Quick Reference Card
PASSPORT 9500ci Quick Reference Card
Remove card along perforations
Press the VOL button
to go from one category
to the next
PILOT
(Power-on indication)
GPS
AUTOLEARN
SPEED ALERT
METER
AUTOMUTE
UNITS
VOICE
BANDS
MARKERS
Pilot HWY
Pilot H
Pilot H.>
Pilot V
Pilot SPD
GPS ON
GPS OFF
aLrn ON
aLrn OFF
sAlrt ON
sAlrt OFF
Meter STD
Meter EXP
Meter SPC
aMute ON
aMute OFF
Units ENG
Units MET
Voice ON
Voice OFF
Bands DFT
Bands MOD
X ON
or OFF (default is on)
K ON or OFF (default is on)
Ka ON or OFF (default is on)
POP ON or OFF (default is off)
SWS ON or OFF (default is off)
LSR RECV or SHFT or OFF
(default is RECV)
Mark DFT
Mark MOD
rCam ON or OFF (default is on)
sCam ON or OFF (default is on)
Trap ON or OFF (default is on)
Othr ON or OFF (default is on)
Press the BRT/CHG button
to change your setting
within a category
* Full word: Highway, AutoScan, etc.
Letter: H, A, ANX
Letter, with scanning dot
Vehicle voltage
Vehicle speed
* GPS On
GPS Off
* AutoLearn On
AutoLearn Off
* Speed Alert On
Speed Alert Off
* Bar-graph Meter
Expert Meter
Spec Display
* AutoMute On
AutoMute Off
* Units English
Units Metric
* Voice Alerts On
Voice Alerts Off
* Factory Default Settings
Factory Default Settings Modified
Turn bands ON or OFF by
pressing the MUTE button
* Factory Default Settings
Factory Default Settings Modified
* Factory Default Settings
Remove card along perforations