Filter
Top Products
Installing and Configuring the EVGA nForce 680i SLI Motherboard
58
MAC Config
Press Enter to display the MAC Config menu.
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to
Auto or
disable their functions.
IEEE1394 controller
This function on the Integrated Peripherals menu allows you to enable or
disable the IEEE1394 (Firewire) interface.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or
disable the high-definition audio function.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select
[Enabled] to automatically detect
the optimal number of block read/writes per sector the drive can support.
Select
[Disabled] if your drive does not support block mode.
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or
disable the onboard FDC controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the
onboard serial port 1 function. Options are
[3F8/IRQ4], [2E8/IRQ3],
[3E8/IRQ4], [Auto], and [Disabled].
MAC0 LAN [Enabled]
MAC1 LAN [Disabled]