Filter
Top Products
Installing and Configuring the EVGA nForce 680i SLI Motherboard
36
Drive A
None ..... [ ]
360K, 5.25 in. ..... [ ]
1.2M, 5.25 in. ..... [ ]
720K, 3.5 in. ..... [ ]
1.44M, 3.5 in. ..... [ ]
2.88M, 3.5 in. ..... [ ]
:Move ENTER:Accept ESC:Abort
Halt On
All Errors ..... [ ]
No Errors ..... [ ]
All , But Keyboard ..... [
]
All , But Diskette ..... [ ]
All , But Disk/Key ..... [ ]
:Move ENTER:Accept ESC:Abort
Drive A
The Drive A option allows you to select the kind of FDD to install.
Options are:
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
Use the
Page Up and Page Down keys to scroll
through the options or press
Enter to display
the sub-menu. Use the arrow keys to
position the selector in the option you choose. Press
Enter to accept the
changes and return to the Standard CMOS Features menu.
Halt On
Halt On determines whether or not the computer stops if an error is detected
during power on. Use the
Page Up and Page Down keys to scroll through the
options or press
Enter to display the Halt On sub-menu. Use the arrow keys
to position the selector in the option you choose. Press
Enter to accept the
changes and return to the Standard CMOS Features menu.
All Errors
Whenever the BIOS detects a nonfatal
error, the system stops and prompts you.
No Errors
S
ystem boot does not stop for any
detected errors.
All, But Keyboard
System boot does not stop for keyboard
errors, but does stop for all other errors.
Drive A [1.44, 3.5 in.]
Halt On [All , But Keyboard]
Drive A [1.44, 3.5 in.]
Halt On
[
All
,
But Ke
y
board
]
Press ENTER to dis
p
la
y
sub-menu
Press ENTER to dis
p
la
y
sub-menu