Filter
Top Products
Operation, cont’d
CrossPoint Plus Matrix Switchers • Operation3-14
Example 6: Save a preset
Refer to figure 3-14 and the following steps for an example of saving the current
configuration as a preset.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
ESC
A
1
C
PRESET
B
C
B
B
LED key: = off, = on, = blinking,
= flash once
F
F
F
Figure 3-14 — Example 6: Saving the current configuration as preset 1
A
Press and release the Esc button. The Esc LED flashes once.
B
Press and hold the Preset button for approximately 2 seconds until the Preset
LED begins to blink, then release the Preset button.
C
Press and release the input 1 button. The input 1 LED flashes once. The
Preset LED turns off.
Example 7: Recall a preset
Refer to figure 3-15 and the following steps for an example of recalling a preset to
become the current configuration.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
ESC
A
1
C
PRESET
B
C
LED key: = off, = on
= flash once
F
F
F
Press
Press
Press
Figure 3-15 — Example 7: Recalling preset 1
A
Press and release the Esc button. The Esc LED flashes once.
B
Press and release the Preset button. The Preset LED lights.
C
Press and release the input 1 button. The input 1 LED flashes once. The
Preset LED turns off. The configuration stored in memory location 1 is now
the current configuration and can be viewed in the view-only mode
(Example 4).