Filter
Top Products
Introduction, cont’d
CrossPoint 42 HVA Matrix Switcher • Introduction1-4
Switching — Individually buffered, independent matrix switched outputs with
audio follow and audio breakaway.
• Any input to any output
• Audio follow — Audio can be switched with the corresponding video input.
This feature allows any audio signal to be selected with any video signal
simultaneously to one or all outputs in any combination. Audio follow
switching can be done via front panel or under RS-232 remote control.
• Audio breakaway — Audio can be broken away from its corresponding
video signal. Audio breakaway switching can be done via front panel or
under RS-232 control.
Remote control — The CrossPoint 42 is remote controllable, using the MCP 1000
master control panel and any combination of MCP 1000 slave control panels
and/or MKP 1000 slave control keypads. The remote control devices are easy
to use and provide tactile buttons for quick selection. Each MCP 1000 can be
used for one-touch switching for a particular output and selecting global
presets. Each MKP 1000 dedicated to an output can be used to select a
different input for that output or to select a preset.
Executive mode (front panel security lockout) — If the CrossPoint 42 is installed in
an open area, where operation by unauthorized personnel may be a problem,
a security lock-out feature can be implemented. When the front panel is
locked, a special button combination is required to unlock the front panel
controller before it can be operated.
Rack mount — The switcher is mountable in any conventional 19” wide rack.
Power — The internal 100VAC to 240VAC, 50/60 Hz, 40 watt, auto-switchable
power supply provides worldwide power compatibility.