A-3CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers
Audio input
Number/signal type ................... 4 stereo, balanced/unbalanced
Connectors .................................... 4 3.5 mm captive screw connectors, 5 pole
Impedance .................................... >10 kohms unbalanced/balanced, DC coupled
Maximum level ............................ +19.0dBu, (balanced or unbalanced) at stated %THD+N
Input gain adjustment................. -18dB to +24dB, adjustable per input by RS-232 or front panel
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio output
Number/signal type ................... 2 stereo, balanced/unbalanced
Connectors .................................... 2 3.5 mm captive screw connectors, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain ............................................... Unbalanced -6dB, balanced 0dB
Gain error...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) ......... >+15dBm, balanced or unbalanced at stated %THD+N
0dBu = 0.775 volts (RMS).
Control/remote — switcher
Serial control port ........................ 1 RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations .... 2 = TX, 3 = RX, 5 = GND
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 40 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount................................... Yes
Enclosure type.............................. Metal
Enclosure dimensions ................. 1.75" H x 17.5" W x 9.5" D (1U high, full rack width)
(4.4 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors. Width excludes rack ears.)
Product weight............................. 4.9 lbs (2.2 kg)
Shipping weight........................... 8 lbs (3.6 kg)
DIM weight............... ___
Vibration ....................................... NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.