Extron electronic PS 124 Power Supply User Manual


  Open as PDF
of 24
 
PS 124 12 VDC, 4 Amp Power Supply • Installation Manual
PS 124, cont’d
12
Above-projector mounting
PMK 350
ThePMK350,(part#70-563-03),isanabove-projectormounting
kitthatattachestoa1"to2"diameterprojectormountingpole
(gure11).Itcanholdmultipledevicesinavarietyofsizes.
N
These instructions are for the PMK 350. If another
above‑projector mounting is used, follow the installation
instructions for that kit.
RED-OVERLOAD
P/S 124
12 VDC 4A POWER SUPPLY
BASS
LEVEL
TREBLE
MINI POWER AMPLIFIER
MPA 122
ON
OFF
LIMITER
STEREO
DUAL
MONO
Extron
PMK 350
Multi-product Projector
Mounting Kit
Extron
PS 124
12 VDC 4 A
Power Supply
Cover Shee
t
Front Plate
Rear Plate
U-bolt
Extron
IPL T S2
Ethernet Control
Interface
Extron
MPA 122
Mini Power Amplifier
COM 1
LAN
UID# 093012052
POWER
12V
.5A MAX
COM1
TX
RX
TX
RX
COM2
COM 2
Figure 11 — Projector mounting the PS 124
TomountthePS124ontothePMK350bracket:
1. RemovethefrontandrearplatesfromthePMK350
(gure11).Retainthescrewstoreattachtheplates.
2. Ifnecessary,removethefeetfromthebottomofthePS124.
3. Securetheunittoonesideofthemountingtray,usingtwo
ofthe4-40x3/16"screwsinopposite(diagonal)corners.
4. PlacethePMK350aroundtheprojectorceilingmounting
pole(gure11,above).
 previous next