Filter
Top Products
ii
RGB 400
xixi
xixi
xi Series Installation Guide • Table of Contents
Table of Contents, cont’d
RGB 400
xixi
xixi
xi Series Installation Guide
About this Guide
This guide contains installation information for the Extron
RGB 400 Series of interfaces. These interfaces are designed
to fit into standard 2-, 3-, and 4-gang electrical wall boxes.
The EC versions of these interfaces are designed to fit into a
Euro Channel. The following models will fit the indicated
wall box or channel:
• RGB 460xi and RGB 472xi* – A standard, 2-gang
electrical wall box.
• RGB 464xi, RGB 474xi, RGB 468 Mxi, and RGB 478 Mxi*
– A standard, 3-gang electrical wall box.
• RGB 460xi Dual, RGB 468xi, and RGB 478xi * – A
standard, 4-gang electrical wall box.
• RGB 460xi EC, RGB 472xi EC, RGB 468xi EC, and RGB
478xi EC – Standard Euro Channel.
“RGB 400xi” or “interface” will be used to refer to all models
interchangeably unless otherwise noted.
For information about wiring, cabling, and operating the
interface, refer to the user’s manual for your specific product.
* These interfaces are also wall/furniture mountable and come
with a matching mud ring kit (part #70-086-xx), as well.
Installation Overview
CAUTION
Installation and service must be performed by
authorized personnel only. UL Listed electrical
boxes are recommended. See the section on “UL
Requirements”.
To install and set up an RGB 400xi Series interface, follow
these steps:
1
Turn all of the equipment off. Make sure that the
computer, the interface, and the output devices
(projector/monitor, speakers) are all turned off and
disconnected from the power source.
2
If applicable, prepare the site: cut a hole in the wall/
furniture, install the electrical box or mud ring, and
prepare the cables. Instructions are included in this
manual and/or with the wall box (see “Preparing the
site and installing the wall box”). For installation of
the Euro Channel (EC model) interfaces, see the
sections on “Euro Channel versions” and “Euro
Channel installation”.
1