Filter
Top Products
To Terminate a Remote Control Session Using Hot Keys
Using the keyboard attached to the VN 200 decoder or encoder, press the <Scroll Lock>
key twice, followed by the <F2> key.
Both the source monitor and display monitor will briefly show MK:Local in the top
left-hand corner as shown here.
MK:LocalMK:Local
MK:Local MK:Local
Mouse and Keyboard Control
1. Login to the web interface (see “System Configuration”).
2. From the Device List page click on the required encoder device.
3. From the Device page click the Peripherals tab to display the following:
Figure 39. Peripherals Page
VN-Matrix 200 Series • Remote Keyboard and Mouse Operation 52