Filter
Top Products
UA88382 USB Interface Option Card
This option card supports the connection of (1) USB interface cable for use with UPSilon remote monitoring,
management and unattended O/S shutdown software.
UA88383 Dry Contact Interface Option Card
This card provides dry contact closure signals for UPS on bypass, utility normal, inverter on, low
battery, abnormal battery, UPS summary alarm. It also provides EPO and remote UPS shutdown capability.
USHA SNMP/HTTP Agent Option Card
Remote server and computer shutdown client software is also provided on the CD that is shipped with this option. The
software supports the shutdown of multiple servers or computers “in-band” across any Ethernet LAN. The client software
may be installed on as many systems as required and supports most MS Windows and server platforms, in addition to
LINUX.
34
1
3
4
2
Pin 1 - VCC (+5V)
Pin 2 - D-
Pin 3 - D+
Pin 4 - Ground
123456
7
8910
Pin 1 - UPS on Bypass
Pin 2 - Utility Abnormal
Pin 3 - Utility Normal
Pin 4 - Inverter On
Pin 5 - Low Battery
Pin 6 - Abnormal Battery
Pin 7 - UPS Summary Alarm
Pin 8 - Common
Pin 9 - Shutdown UPS (+) signal
Pin 10 - Shutdown UPS (-) signal
Pins 9 & 10 apply 6-25Vdc for 5
seconds to activate shutdown.
12
CN1
Pin 1 - REPO 1
Pin 2 - REPO2
Now you can monitor and manage your Falcon
Electric FN Series UPS across an Ethernet LAN,
WAN, Enterprise Network or via the World Wide Web.
With our Universal SNMP/HTTP Agent board (USHA),
remote management is easy using a standard web
browser or Network Management Software (NMS).
Remote SNMP/HTTP UPS management is a simple
matter of inserting our USHA board into the designated
option port provided on the rear panel of every FN
Series UPS.
The USHA board is supplied with a SNMP UPS MIB II
compliant "snap-in" Management Information Base
(MIB). The MIB is compatible with HP OpenView and
other Network Management Software (NMS).