Filter
Top Products
Installation
CER International bv 9
LED indicator
Next to the Power Connector there is a green LED on the front panel for indicating system
status. This LED is lit when power is supplied to the unit.
Power connector
Power to the controller is accommodated by a DC jack “J9” or by passive power over
ethernet connector. The DC jack is attached to a 18V external DC power supply. Power
supplied to the unit must be within the specifications listed in this manual.
Back
(FC2700/FC3700 only)
USB
(FC372x only)
RS232/RS485 USB
(FC373x only)
RS232/RS485 RS232 USB