Filter
Top Products
FS-8700-39 EST3 Driver Manual Page 5 of 21
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
4. Configuring the FieldServer as a EST3 Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration
Manual. The information that follows describes how to expand upon the factory defaults provided in the
configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer to
communicate with an EST3 Server.
4.1. Data Arrays
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In
order to enable the FieldServer for EST3 communications, the driver independent FieldServer buffers
need to be declared in the “Data Arrays” section, the destination device addresses need to be
declared in the “Client Side Nodes” section, and the data required from the servers needs to be
mapped in the “Client Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default
Section Title
Data_Arrays
Column Title Function Legal Values
Data_Array_Name Provide name for Data Array Up to 15 alphanumeric characters
Data_Format Provides data format UINT16
Data_Array_Length Number of Data Objects 1 - 10000
Example
// Data Arrays
Data_Arrays
Data_Array_Name ,Data_Format ,Data_Array_Length
DA_AI_01 ,Float ,200
DA_AO_01 ,Float ,200
DA_DI_01 ,Bit ,200
DA_DO_01 ,Bit ,200