Filter
Top Products
FS-8704-12_GE-EGD Manual Page 17 of 26
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
• Note the Local Producer address. Typically it will be the same as the IP of the
closest GE Ethernet port. You can override this.
• Add Ranges. Record the offset and reference for each data range in the exchange.
• Save your work.
• Close HWC.
• Stop the processor.
• Store the Hardware settings to the PLC
• Put the processor back in run mode (must be running to produce.)
A second screen image shows that this exchange actually has an additional range at
offset 8.
This is the producerID.
It may be the same as the IP address
of the adapter but this is not always
the case.