Filter
Top Products
21
KEYSTONE ADJUSTMENT
1
Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING Menu (P36). The message “Keystone” is
displayed.
2
Correct keystone distortion by pressing POINT UP/DOWN
button(s). Press POINT UP button to reduce upper part of the
image, and press POINT DOWN button to reduce lower part of
the image.
To reset Keystone adjustment, press NORMAL button.
Message disappears after 4 seconds.
Reduce the upper width with POINT UP button. Reduce the lower width with POINT DOWN button.
Keystone
If image has keystone distortion, correct image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
Message disappears after 4 seconds.
Lens shift
LENS SHIFT ADJUSTMENT
1
Press LENS SHIFT ▲/▼ button(s) on Top Control or LENS
SHIFT button on Remote Control Unit. The message “Lens
shift” is displayed.
2
Press LENS SHIFT ▲ button or POINT UP button to move
image up, and press LENS SHIFT ▼ button or POINT DOWN
button to move image down.
Refer to P9 for operating range.
1
Press ZOOM ▲/▼ button(s) on Top Control or on Remote
Control Unit. The message “Zoom” is displayed.
2
Press ZOOM ▲ button or POINT UP button to make image
larger, and press ZOOM ▼ button or POINT DOWN button to
make image smaller.
1
Press FOCUS ▲/▼ button(s) on Top Control or on Remote
Control Unit. The message “Focus” is displayed.
2
Adjust focus of the image by pressing FOCUS ▲/▼ button(s) or
POINT UP/DOWN button(s) .