Filter
Top Products
4-1
Chapter 4
Applications
Introduction
Chapter 4 discusses some applications that will help you use the meter effectively. These
applications assume you are familiar with the basic operation of the meter and have a
basic understanding of electronics. A sophisticated understanding of electrical circuits is
not necessary.
Using the Dual Display
Using the dual display effectively and with ingenuity can greatly enhance your test and
measurement capabilities. By allowing you to make several measurements on a particular
input signal, the dual display makes it easy to take measurements that in the past required
you to use two meters or make a series of measurements.
To see the ease with which the dual display can be used to take a reading of the ac
component of a signal on one display and its frequency on the other, perform the
following procedure to measure the voltage and frequency of line power:
1. Press in POWER to turn the meter on.
2. Plug the test leads into the X and COM input terminals.
3. Press Z to select volts ac for the primary display.
4. Press S , then press F to select frequency for the secondary display.
5. Insert the test lead probes into a wall socket. The display will appear something like
Figure 4-1.