Fluke Ti40 Power Supply User Manual


 
Introduction
Safety Information
1
1-3
A WCaution identifies conditions and actions that could damage the camera
or cause permanent loss of data.
WCaution
To avoid damaging your Camera, treat it with care as you
would any type of precision equipment.
Your infrared camera is a precision instrument that uses a
sensitive infrared (IR) detector. Pointing your camera
towards highly-intense energy sources—including devices
that emit laser radiation and reflections from these
devices—may adversely affect camera accuracy and may
harm or permanently damage your camera’s IR detector.
Your camera was calibrated prior to shipping. We
recommend that you have your camera checked for proper
calibration every two years. Some ISO 9000 programs
require more frequent checks for certification. Contact
Fluke for details.
Your camera requires three minutes to warm up before
accurate measurements are available.
*WWarning
Your camera contains a Class 2 laser pointer. See diagram
in Appendix B for laser aperture location.
To avoid eye damage, do not point laser directly at eye or
indirectly off reflective surfaces.
Use of controls or adjustments or performance or
procedures other than those specified herein may result in
hazardous laser radiation exposure.
Do not use camera in a manner not specified in this
manual or the protection provided by the equipment may
be impaired.