Fluke Ti40 Power Supply User Manual


 
Ti40, Ti45, Ti50, Ti55
Users Manual
1-10
Set Temperature Level and Span
1. Press G as shown in Figure 1-6 to automatically set the camera’s
temperature level and span.
2. Press G again as needed to properly scale the image.
Level & Span
eii006.eps
Figure 1-6. Setting the Level and Span
Set IR Fusion Blend Level - Ti45, Ti50, Ti55 with
Fusion
1. Press and hold G until the IR Fusion blend level control box appears on
the display screen.
2. While continuing to press G, use the MOUSE controller shown in
Figure 1-7 to slide the IR Fusion blend level bar in the control box to the
desired setting.
3. Tap the TRIGGER button to retain settings.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com