Filter
Top Products
NAT/Route mode installation Starting the setup wizard
FortiGate-800/800F Installation Guide 01-28006-0024-20041026 37
To connect the FortiGate unit running in NAT/Route mode
1 Connect the Internal interface to the hub or switch connected to the internal network.
2 Connect the External interface to your public switch or router.
3 Optionally, connect the DMZ interface to the DMZ network.
You can use a DMZ network to provide access from the Internet to a web server or
other server without installing the servers on the internal network.
Figure 10: FortiGate-800/800F NAT/Route mode connections
To connect to FortiGate-800/800F user-defined interfaces
1 Connect the user-defined interface to the hub or switch connected to the intended
network.
Esc Enter
CONSOLE
INTERNAL EXTERNAL DMZ HA 123
4 USB
8
PWR
Internet
Internal
External
DMZ
FortiGate-800
Internal Network
DMZ Network
Mail Server
Web Server
Hub or Switch
Public Switch
or Router