Fortinet 800 Switch User Manual


 
48 01-28006-0024-20041026 Fortinet Inc.
Reconnecting to the web-based manager Transparent mode installation
Figure 12: FortiGate-800/800F Transparent mode connections
Next steps
You can use the following information to configure FortiGate system time, to register
the FortiGate unit, and to configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide for complete information on configuring,
monitoring, and maintaining your FortiGate unit.
To set the date and time
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiGate unit to automatically keep its time correct by synchronizing with a Network
Time Protocol (NTP) server.
1 Go to System > Config > Time.
2 Select Refresh to display the current FortiGate system date and time.
3 Select your Time Zone from the list.
4 Optionally, select Automatically adjust clock for daylight saving changes check box.
Esc Enter
CONSOLE
INTERNAL EXTERNAL DMZ HA 123
4 USB
8
PWR
Internet
Internal
External
DMZ
FortiGate-800
Internal Network
Other Network
Hub or Switch
Public Switch
or Router
Interface 4
Other Network