Filter
Top Products
100 05-16000-0082-20050115 Fortinet Inc.
CLI commands FortiLog CLI reference
Commands Description
set log client <client_string> deviceid <id_string>
secure {yes | no} psk <psk_string> space
<number> filesz <filesz_integer> fileage
<fileage_integer> spacefull {overwrite_oldest |
stop_logging}
Configure the FortiLog to log a FortiGate client.
• <client_string> is the name of the client.
• <id_string> is the FortiGate client ID, for example, the serial number.
• {yes | no} provides the option to configure secured connection or not.
• <psk_string> is the pre-shared key number.
• <number> is the amount of the allocated disk space. Set disk quota
from 0 to 4000 MB. A disk quota of 0 is unlimited
.
• <filesz_integer> is the size limit for the log files. The default log file size
is 10 MB.
• <fileage> is the time limit for the FortiLog unit to keep the log files. The
default log file age is 10 days.
• {overwrite_oldest | stop_logging} allows you to select what you want
the FortiLog unit to do when the allocated disk space for the FortiGate
device is used up.
set log raid <raid_level> Set the log RAID level: linear, 0, 1, or 5. There is no default value for this
option.
set log raid uuid <raid_uuid> Set the log RAID universal unique identifier.
set log devicegroup <string> Create a device group to add devices to.
set log setting console loglevel
<severity_integer>
Set the console log severity level
0 = Emergency, 1 = Alert, 2 = Critical, 3 = Error, 4 = Warning, 5 =
Notification, 6 = Information
The log levels will be up to but not higher than the value you set.
set log setting local status {enable | disable} Enable or disable logging to the FortiLog unit hard disks.
set log setting local filesz <file-sz_integer> Set the maximum size for the Fortilog local log file.
set log setting local logtime <days_integer> Set the number of days before the FortiLog unit starts a new log file.
set log setting local diskfull
set log setting local memory status <enable |
disable>
Configure the FortiLog unit to log to the local memory.
set log setting local memory loglevel
<severity_integer>
Set the local FortiLog unit log severity level
0 = Emergency, 1 = Alert, 2 = Critical, 3 = Error, 4 = Warning, 5 =
Notification, 6 = Information
The log levels will be up to but not higher than the value you set.
set log setting syslog local status loglevel
<severity_integer>
Set the local FortiLog unit log severity level
0 = Emergency, 1 = Alert, 2 = Critical, 3 = Error, 4 = Warning, 5 =
Notification, 6 = Information
The log levels will be up to but not higher than the value you set.
set log setting syslog local status loglevel
<severity_integer> csv {enable | disable}
Enable or disable CSV format to record log messages to the FortiLog
unit hard disk in comma-separated value (CSV) formatted files. Log
message fields are separated by commas.
set log setting syslog remote {enable | disable} Enable or disable logging to the remote syslog server.
set log setting syslog remote server <server_ip> Configure the remote syslog server log setting.
• <server_ip> is the IP address of the remote server.
set log setting syslog remote server <server_ip>
port <port_integer>
Configure the port that the remote syslog server uses to receive log
messages.
• <port_integer> is the port number of the server.
The default port is 514.