Filter
Top Products
Managing the FortiLog unit Status
FortiLog Administration Guide 05-16000-0082-20050115 41
To upload the firmware image to the FortiLog unit
1 Make sure the TFTP server is running.
2 Copy the firmware image file to the root directory of the TFTP server. Ensure the file
name is image.out.
3 Start the FortiLog unit.
As the FortiLog unit starts, the following message appears:
Press any key to begin download.....
4 Immediately press any key to begin the automatic download.
The FortiLog unit connects to the TFTP server and begin downloading the firmware
image. Once downloaded, the FortiLog will load the firmware and proceed with the
system startup.
RAID
Use the RAID (Redundant Arrays of Inexpensive Disks) tab to set automatic refresh
interval and view detailed log device information.
Figure 12: RAID
Note: RAID functionality is only available on the FortiLog-400 and 800. These units have four
hard disks and support RAID level 0, 1, and 5.
Automatic Refresh
Interval
Select to control how often the web-based manager updates the RAID
information.
Go Select to set the selected automatic refresh interval.
Refresh Select to manually update the RAID information.
Create Date Date and time when the RAID was created. This information may be
incorrect if the FortiLog clock is changed after creating the RAID.