Filter
Top Products
46 05-16000-0082-20050115 Fortinet Inc.
Config Managing the FortiLog unit
Time
To change the FortiLog unit time, go to System > Config > Time. For effective
scheduling and logging, the FortiLog system time must be accurate. You can either
manually set the FortiLog system time or you can configure the FortiLog unit to
automatically keep its system time correct by synchronizing with a Network Time
Protocol (NTP) server.
Figure 17: Time settings
Options
To change the FortiLog administration options, go to System > Config > Options. On
the System Config Options page, you can set:
• the system idle timeout.
• the language for the web-based manager.
Figure 18: Options
Admin
To change the FortiLog administrator settings, go to System > Config > Admin. Use
admin options to add and configure FortiLog administrators. For information on
FortiLog administrators, see “Devices (Active mode)” on page 49.
Idle Timeout Enter an idle timeout number in minutes. Idle Timeout controls the
amount of inactive time that the web-based manager waits before
requiring the administrator to log in again.
The recommend idle time out is 5 minutes. The maximum idle time out is
480 minutes (8 hours).
Language Select a language for the web-based manager to use. You can choose
English, Simplified Chinese, Japanese, Korean, or Traditional Chinese.