Filter
Top Products
Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide
4 - 8 © 2007 Foundry Networks, Inc. September 2007
• For twisted-pair connections to an end node, use straight-through cabling.
• For fiber-optic connections, verify that the transmit port on the device is connected to the receive port on
the connected device, and that the receive port on the device is connected to the transmit port on the
connected device.
• Verify that the port has not been disabled through a configuration change. You can use the CLI. If you have
configured an IP address on the device, you also can use the Web management interface or IronView
Network Manager.
• If the other procedures don’t resolve the problem, try using a different port or a different cable.