Filter
Top Products
Foundry NetIron M2404C/M2404F Metro Access Switches
January 2007 © 2007 Foundry Networks, Inc. 18
Initial Configuration Using the Console
Initial Configuration
The Configuration command-language interface (CLI) is accessed by using a VT-100 (or
compatible terminal) to the console port of the switch. The terminal port parameters are fixed at:
9600 bps, 8 data bits, 1 stop bit, no parity and without flow control. This provides a convenient
method for initial setup of the switch. System parameters are stored in a non-volatile memory.
They need to be set up only during the initial setup or when the system has been reset to the
factory defaults.
The following keys are used to access the menu:
Enter
Ends an input line
Backspace
Clears last character in input mode
Tab
Auto-Completes a command
A screen similar to the following example appears on the Console Port at power up or reset:
////////////////////////////////////////////////////////////////////
//
// Foundry Networks
//
// Switch model : NETIRON M2404F
// SW version : 2.0.00 created January 12 2007 - 21:35:37 //
// //
///////////////////////////////////////////////////////////////////
User Access Verification
Password:
There is no default password, press <Enter> for password.
NOTE
You can configure the password later.
Type ? to display the available commands:
device-name>?
alias An alias of a command
dir List files in flash.
display Display file.
enable Turn on privileged mode command
exit Exit current mode and down to previous mode
help Description of the interactive help system
ls List files in flash.
no Negate a command or set to defaults