Filter
Top Products
21
EN
4
Enabling data protection by keycard
Confirm once again that you really want to format the hard drive.
After that, a window with a progress bar will be shown and the device LED will blink red.
Move the first keycard over the sensor on the drive, which is located at the front of the
drive, in the middle (see page 9). If it was successfully recognized, the LED will start
blinking green. Move the second keycard over the sensor. If it was successfully recognized,
the LED will be constantly green. RFID protection is now enabled. The next time you
connect your Freecom Hard Drive Secure, you have to identify with one of the keycards
to access your data.