Filter
Top Products
DRM045 Using the ASB520 MC68HC908QT2 Based Infrared Remote Control Reference PC Board
14 Operational Description MOTOROLA
Operational Description
2.5 Microcontroller Current Monitor Jumper Block
Jumper block JP1 is intended as a connection on the PC board to measure the
stop current of the MC68HC908QT2. To use the feature, you must cut the small
PC board trace located on the bottom side of the PC board between the two
pins of the jumper block. After cutting the trace, and when not using an amp
meter to measure system current a shunt must be installed on JP1.
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...