Freescale Semiconductor M68HC08 Network Card User Manual


 
Using the ASB520 MC68HC908QT2 Based Infrared Remote Control Reference PC Board DRM045
MOTOROLA Introduction and Setup 7
Designer Reference Manual — DRM045
Section 1. Introduction and Setup
1.1 Introduction
Motorola’s ASB520, MC68HC908QT2 Infrared Remote Control Reference PC
Board and software are designed to demonstrate how a simple, limited
function, dedicated remote control system could be designed. The objective is
to keep the design simple so a user can pick portions of interest to his design
and turn them into an application specific system. This system is specifically
programmed to control an APEX model 1201 DVD player.
A few of the more noteworthy features of the reference PC board are listed as
follows:
8-pin MC68HC908QT2 microcontroller
Infrared LED and driver
Visible LED to show activity
Six user push buttons
MON08 programming interface for in-circuit FLASH programming
Battery holder for 3-AA cells
Microcontroller current monitor jumper block
A photograph of the reference PC board appears in Figure 1-1.
1.2 About this Manual
Key items can be found in the following locations in this manual:
Setup instructions are found in 1.3 Setup Guide.
Schematics are found in 4.2 Schematic.
Pin assignments for MON08 connector J1 are shown in Table 3-1.
MON08 Pin Assignments.
User interfaces are described in 2.3 LEDs.
For those interested in the design aspects of the reference PC board’s
circuitry, a description is provided in Section 5. Design
Considerations.
System testing, hardware and software, are described in detail in
Section 6. System Testing.
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...