Filter
Top Products
Removing and Installing the Battery Pack
2-11
Note: When installed in the pen tablet, the battery pack provides power to some system
components—even when the system is in the Fully Off state. When the battery
pack is removed, power is supplied to these components by a “bridge” battery built
into the pen tablet. To prevent draining the bridge battery, always store the pen
tablet with a charged battery pack installed.
Removing and Installing the Battery Pack
To install the battery pack:
1. Slide the battery pack into the pen tablet until it is firmly seated.
2. Slide the battery latch into the locked position.
Once the battery pack is installed, you can resume system operation or start your
system and use the system as you normally would.
Warning
Keep your fingers clear of the area between the battery pack
and the pen tablet when you install the battery pack.
Battery Pack
Battery Latch
Locked
Position
Unlocked
Position