Filter
Top Products
61
Windows 2000 models
1 Set the resolution to 640 x 480 and the number of colors to 256.
2 Set the refresh rate to 60 Hz.
3 Shut down Windows and turn off the PC, then replace the display.
If you have replaced the display without taking the above steps and found that the display does not
work at any or particular resolution, take the following steps to reinstall the display driver.
1 Start Windows from [Enable the VGA mode].
2 Reinstall the display driver.
Windows NT models
1 Turn off the PC and replace the display.
2 Start the PC from Windows NT Workstation Version 4.00 [VGA mode].
3 Set the resolution, number of colors, and refresh rate according to the display. Restart the
PC.
Power-saving function
If the power-saving function works while the PC is playing a movie or during audio playback or recording,
application programs will be unstable. If this is the case, disable the power-saving function.
International EnergyStar Program
The Windows Me/98/2000 models of this series conform to the International EnergyStar Program.
Mouse with a scrolling function (scrolling wheel)
Be sure to connect the scrolling mouse (PS/2) to the PC unit.
When a USB keyboard is used together with the scrolling mouse (PS/2), the mouse may not work in
the Safe mode of Windows 98.
If this occurs, disconnect the USB keyboard and press the mouse buttons, then connect the USB
keyboard. (The scrolling function cannot be used in the Safe mode of Windows 98.)
Intel
®
processor serial number
Intel processor serial numbers are electronically readable serial numbers embedded in the Intel
Pentium III processors. They are useful for security improvement, and information and asset
management. Processor serial numbers can be read by using a software application. This function
can be enabled or disabled on BIOS Setup. The default setting is “Disabled.”
To enable this function, set [Main] – [Processor serial number] to “Enable” on BIOS Setup.