Filter
Top Products
SCENICVIEW A20W-3/A22W-3
Setting display of the OSD menu
Calling the OSD Setup setting window
Language
Setting language for the OSD menu
With this function you choose between English (default setting), French, German,
Italian, Spanish, Russian, Dutch and Swedish as the language for the OSD menu.
OSD
H-Position
Setting the horizontal position of the OSD menu
With this function you move the OSD menu to the left or to the right.
OSD
V-Position
Setting the vertical position of the OSD menu
With this function you move the OSD menu up or down.
OSD
Timeout
Setting the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Setting functions in the "Advanced" menu
Calling the
Advanced setting window
Input select
Selecting input signal only for DSUB (Analog)
The condition is that the graphic card used supports this function.
DDC-CI
Activate/deactivate DDC-CI function
On = the DDC-CI function is activated (default setting)
Off = the DDC-CI function is deactivated
Resolution
Notifier
Displaying monitor data
The optimum resolution for this monitor is 1680 x 1050 pixels
(A20W-3/A22W-3). With the function activated (
On), a message appears on the
screen after approx. 30 seconds if a different resolution is set.
Change the resolution to 1680 x 1050 Pixel (A20W-3/A22W-3).
With the function deactivated (
Off), no message appears.
Factory Recall
Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The
Auto Processing
message is displayed.
Displaying information
Calling the
Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
A26361-K1177-Z120-1-7619, edition 1 19