Filter
Top Products
Page 33
Innovations in IMON V2.8:
The new CHECK-UNITS function allows you to check that the system
is complete, correct and up to date.
For customer-specific installations, all installation parameters
can be saved into a standardized parameter file and passed over
to IMON for all subsequent installations.
All //SHOW statements are extended with the STRUCTURE-OUTPUT op-
erand.
The /MODIFY-IMON-SCI command also works for parked software and
working files.
Special features of the POSIX installation are supported.
The UNDO function also supports PLAM libraries as SAVE-MEDIUM.
IMON V2.8B contains enhancements for dynamically activating sub-
systems in the running system.
You will find detailed information on all innovations in the
SYSFGM.IMON.028.E Release Notice.
*2 Innovations in IMON V2.9
*2 With the new command //REQUEST-CORRECTION-DELIVERY information
*2 on correction deliveries or correction deliveries can be
*2 requested.
*2 When installing, parking and printing delivery documentation
*2 from the delivery medium tape a difference is made between
*2 Original SOLIS2 data carriers (DISTRIBUTION-MEDIUM=*SOLIS2-
*2 VOLUME) and a copy produced by a customer (DISTRIBUTION-
*2 MEDIUM=*LOCAL-VOLUME), which may also be found on a virtual
*2 CentricStor volume. Instead of the previous installation
*2 status “On Tape”, the statuses “On SOLIS2 Volume” and “On Local
*2 Volume” are now displayed and on selection information is
*2 offered.
*2 During installation the new function “installation on the
*2 basis of release notes” is availabe.
*2 The two new commands SET-CUSTOMER-APPROVAL and RESET-CUSTOMER-
*2 APPROVAL have been introduced for the release and withdrawal
*2 of a delivery unit. For the operand UNIT-NAME, the instruction
*2 INSTALL-UNITS has been extended by the value *CUSTOMER-APPROVED.
*2 Detailed information on all innovations is provided by the
*2 release notice SYSFGM.IMON.029.E.