Filter
Top Products
Page 43
4 Hardware support
4.1 Central units
4.1.1 changed support
The following business servers are supported in BS2000/OSD-BC
V6.0. A prerequisite for using BS2000/OSD V6.0 on SX servers is
*2 the hardware abstraction layer X2000 V3.0 based on Solaris V8 as
the base system.
Business Server S110
Business Server S115
Business Server S120
Business Server S130
Business Server S135
Business Server S140
Business Server S145
Business Server S150
Business Server S155
Business Server S160
*5 Business Server S165
Business Server S170
Business Server S180
Business Server S190
*5 Business Server S200
Business Server SX100
Business Server SX130
Business Server SX140
*1 Business Server SX150
The following versions of the HCP (Hardware Control Program) at
least are required for using BS2000/OSD-BC V6.0.
- E05L01A-03R+008 for Business Server S110
*5 - E20L02A-01N+011 for Business Server S115
*5 - E45L01G-01R+008 for Business Server S120 *
*5 - E02L01F-02C+021 for Business Server S130
*5 - E25L01G-02N+111 for Business Server S135 and S150
*5 - E39L01G-02N+122 for Business Server S160
*2 - E40L01G-02Q+016 for Business Server S140 and S170 *
*2 - E14L01S-02Q+000 for Global Store SSU-4
*2 - E60L02G-02E+120 for Business Server S145, S155,
S180, S190 *
*2 - E16L02S-02E+011 for Global Store SSU-5
*6 - E70l01G-01U+039 for Business Server S165 and S200
Notes:
If you want to use fibre channel, before using the HCP versions
marked with *, a new generation with an IOGEN version as of
V14.0C is mandatory (inhibition of I/O interface time monitor-
ing).
The HCP version required for using BS2000/OSD-BC V6.0A can be ob-
tained from your regional service.