Filter
Top Products
Installing the JRE for Linux Clients Initial Browser Setup of the BX600
2
2 Installing the JRE for Linux Clients
Go to http://www.java.com/en/download/linux_manual.jsp
There are two types of installation packages:
• Linux RPM package
• Linux self extracting binary file.
To Install the JRE for Linux clients:
Download the package that best suits your needs. Follow the instructions outlined
on the website.
To test that the JRE is installed, enabled and working properly on your computer,
run the test applet from the following web site:
http://www.java.com/en/download/installed.jsp
3 DKVM network configuration
3.1 Default IP address
The Ethernet port on FSC-DRM is manually configurable from the (MMB) web pages.
Configuration data is passed via the FSC BX600 chassis I2C bus.
The default IP address configuration is static. (DHCP is turned off by default)
• The default settings are:
• Hostname: FSCDigitalKVM
• IP address: 192.168.0.121
• Subnet mask: 255.255.255.0
• Gateway IP address: 192.168.0.1
The MMB default IP address is 192.168.0.120, but it is user configurable
1
.
To launch the KVM configuration web page:
To get to the MMB web page, point your browser to the IP address of the MMB.
Once you have access to the MMB web page, mouse click the dKVM Blade folder
on the left of the page. The dKVM Blade folder expands
click the Network Configuration link to launch the KVM Configuration page.
1. The IP address of the MMB and the IP address of the dKVM must be of the same subnet.