Filter
Top Products
Initial Browser Setup of the BX600 DKVM network configuration
3
Figure 1: KVM Configuration Page
3.2 IP address configuration
Once you have access to the KVM Configuration page, if you want to use a static IP
address, you can set the IP address of the KVM to any valid IP address you choose as
long as that address is in the same subnet as that of the MMB.
If you want to use DHCP, then mouse click the box labeled Use DHCP (For KVM IP
Address)
The given IP-Address will be shown after a few seconds by an update of the network
configuration page.
3.3 Network port settings
The following ports can be configured from the KVM Configuration page:
• Keyboard/Mouse Port
• Virtual Media Port
• Video Port
Their respective defaults are 2068, 3668, and 8192 but you can manually type in
appropriate values in the fields for each port.
For example:
Keyboard/Mouse Port 50000 (2 ports are required)