Filter
Top Products
AP-4
Appendix 2 DAILY CARE
■ Cleaning Materialse
* For details about cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.
■ Cleaning Method
The ADF must be cleaned with a lint-free cloth
moistened with the Cleaner F1.
■ Parts to Clean and When
For details on the cleaning the ADF, refer to "3.2 Clean-
ing the ADF" in fi-4120C2 Operator’s Guide in the
Setup CD-ROM".
•When operating the scanner,
the ADF’s inside glass
becomes very hot.
Before you clean inside the
scanner, turn off its power and
unplug the AC adapter from the
outlet. Wait for at least
15 minutes.
Do not turn off the scanner
when you clean the Feed roll-
ers or Eject rollers.
•When you perform cleaning,
make sure that the inside of the
scanner is free of any foreign
object, and be careful not to get
your hand or the cloth caught
on the pick spring (metal part)
as a deformed pick spring
(metal part) may cause injury.
Cleaning
Materials
Parts
Number
Remarks
Cleaner F1
(or isopropyl
alcohol)
CA99501-
0013
1 bottle
Moisten the cloth
with this fluid and
wipe the scanner
clean.(*)
Lint-free dry
cloth
Commercially available one
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every
1,000 scans.
Pick roller
Feed rollers
Plastic rollers
Glass
ATTENTION
The scanner must be cleaned fre-
quently if you scan any of the follow-
ing type of paper sheets:
• Documents of coated paper
• Documents that are almost completely
covered with printed text or graphics
• Chemically treated documents such as
carbonless paper
• Documents containing a large amount
of calcium carbonate
• Handwritten documents