Filter
Top Products
42
• Pad ASSY
Wipe Pad ASSY with the cloth in the direction from bottom to top.
• Pick roller unit
Wipe the Pick roller unit by moving the cloth from side to side of rollers. Rotate the rollers
forward with your finger and repeat the wiping procedure until all surface of roller are
cleaned.
• Pinch rollers
Clean Pinch roller softly not to damage its surface. Try to remove any black stain which
may degrade the performance of paper feeding
3. Push in the center of the ADF to return it to its original position, until it clicks.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities
of the cleaner. In addition, wipe off the cleaner completely with a soft lint-
free cloth to leave no residue on the surface of the cleaned parts.
ATTENTION
Be careful not to hook the pick springs, sensor lever and mylar sheet
near the Pad ASSY.
ATTENTION
Close the ADF until it clicks. Paper jams or feeding errors may occur if the
ADF is not closed completely.
Sensor
lever
Pick Springs
Mylar
sheet