Fujitsu FS-1108AU/FS1108MU Switch User Manual


 
9
(2) [ServerSelection] switch
Pushing the [ServerSelection] switch selects a server. Ports can also be selected when
the power status of the server is OFF.
(3) [AutoScan] switch
Pressing the [AutoScan] switch starts the AutoScan mode. In the AutoScan mode, the
screen of servers with ports for which the power is ON can be changed automatically in
order.
Refer to "11-2-5. AutoScan Mode" for more details.
(4) [RESET] switch
This switch is not used for normal operations. Use the [RESET] switch when servers
cannot be selected or input errors occur with the mouse and keyboard by pressing the
[RESET] switch lightly with the tip of a pen or similar object.
Pressing the [RESET] switch resets the microcomputer in the KVM Switch.
After resetting, the restoration process does not affect server operation because the
PS/2 keyboard and PS/2 mouse are restarted with their modes maintained.
The USB keyboard and the USB mouse are disconnected for a one second interval.
This disconnection operation is used to restore USB operation.
When the [RESET] switch is
pressed for a short time
(within 5 seconds)
When the [RESET] switch is
pressed for a long time
(5 seconds or more)
For level 1
connection
The USB disconnection process is
performed for the selected ports
and consoles.
The USB disconnection process
is performed for all of the ports
and consoles.
The mode becomes the POWER
SUPPLY: ALWAYS ON mode.
For
cascade
connection
The USB disconnection process is
performed for the selected ports
and consoles when the [RESET]
switch on the master side is
operated.
In addition, the recognition process
of the cascade connection is tried
again.
The USB disconnection process is
performed for the selected ports
on the slave side when the
[RESET] switch on the slave side
is operated.
The USB disconnection process
is performed for all of the ports
and consoles on the slave and
master side when the [RESET]
switch on the master side is
operated.
In addition, the mode becomes
the POWER SUPPLY:ALWAYS
ON mode after the recognition
process of the cascade
connection is tried again.
The USB disconnection process
is performed for all of the ports
on the slave side when the
[RESET] switch on the slave
side is operated.