Fujitsu FS-1108AU/FS1108MU Switch User Manual


 
37
iv. Registering and changing the server name
(1) Use the console key to register the server name and to change the ports.
(2) Press <Tab>.
(3) The character string becomes yellow and the mode changes to the server name
input mode.
(4) Enter the server name on the keyboard and press <Enter> to register or change
the name.
Pressing <Del> deletes one character, and pressing <BS> goes back one space.
When <ESC> is pressed, input is canceled and the screen that was displayed
before registering or changing the server name is returned to.
Up to 17 characters can be entered for a server name.
The following 46 characters can be used to register a server name:
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890,./[]:+×- and spaces.
In the server name input mode, press <Ctrl> + <C> to copy a server name and
press <Ctrl> + <V> to paste the copied server name.
(5) The following keyboard operations can be used to return the server names to their
factory settings.
- Press the left <Ctrl> key + the right <Shift> key + <Tab> at the same time while
the OSD is displayed
- Press the right <Ctrl> key + the left <Shift> key + <Tab> at the same time while
the OSD is displayed
Note: When a cascade connection is used, the above information is registered on the
master side.