Filter
Top Products
20
LifeBook C1400 Series Notebook - Section Two
reconfigure. Click on the Browse button. Scroll down to
the application you want to associate with the buttons,
click on the application you wish to launch with this
button, and then click Open. Click OK, and the button
will now launch the new application.
One of the buttons may be preconfigured to launch your
default Internet browser. In order to reconfigure it to
launch a different program, follow these easy steps:
1. Click on the Internet tab of the application panel
utility. Click on the down-arrow in the Specify the
button action: field. Select Start Other Program
from the dropdown list.
2. Click on the Browse button.
3. Scroll down the list of applications, and click on the
application you wish to launch with this button.
Click on Open.
4. Click OK.
The button will now launch the new application. If you
want to return to launching your default Internet
browser with this button, you need only click on
“Default Internet Browser” from the dropdown list. Be
aware that you will erase the settings for the other appli-
cation. If you wish to go back to launching the other
application from this button, you will need to recon-
figure it as described above.
The E-mail tab can be modified in the same manner as
the Internet tab.
At the bottom of each application setup page are two
selectable options. The first will enable/disable the button
when your LifeBook notebook is in Standby mode, and
the second will enable/disable the button when your Life-
Book notebook is in the pseudo-off state. You can enable/
disable either or both of these functions simply by
clicking on the option.
When you have finished with Application Panel utility,
click on OK, and the new settings will take effect. You
can reconfigure your LifeBook Application Panel as
often as you like.
USING THE MEDIA PLAYER
The media player allows you to use your LifeBook note-
book’s optical drive as an audio media player.
There is no configuration required for media player
operation. The buttons are pre-configured to work like a
normal media player. When the selector switch is in the
bottom position, the buttons will operate as follows:
■
Stop/Eject: This is the first button to the right of the
Mode button. Press it once to stop an audio CD that is
playing. Press it twice to eject the audio CD.
■
Play/Pause: This is the second button to the right of
the Mode button. Press this button to start playing an
audio CD starting at Track 1. While the audio CD is
playing, press it to pause. Press it again to continue.
■
Fast Backward: This is the third button to the right of
the Mode button. Press this button once to skip one
track back.
■
Fast Forward: This is the fourth button to the right of
the Selector switch. Press this button once to skip
forward one track.
If you choose to use the buttons when the
notebook is in standby, they will function
even if hit accidentally, and will turn on
your notebook even if you are not present
or using the notebook. This could deplete
your battery, and you will need to recharge
it before using the notebook.
■
If you shut down from Windows while
the media player is playing an audio CD,
it will stop.
■
You cannot go into Suspend Mode or
Hibernation (Save-to-Disk) Mode while
the media player is playing a CD.
■
The media player will only play when
the system is powered on.
■
If you press the play button and nothing
happens, you either have the Selector
switch locked, there is no audio CD in
the media player drive, you have a CD
other than an audio CD in the drive, or
system is not powered on.
■
Because of the Windows CD auto-inser-
tion function, audio CDs will start play-
ing immediately after they are inserted if
your LifeBook notebook is on. This will
not happen if you are using the media
player in Suspend or Pseudo-off modes.
clio.book Page 20 Friday, June 2, 2006 10:37 AM