Filter
Top Products
— 25 —
Switch No. Setting Default Set Values
Memory SW7-1 Baud Rate 9600 bps 1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps, 115200 bps
SW7-2 Data Length 8bits 7bits, 8bits
SW7-3 Stop Bit 1bit 1bit, 2bits
SW7-4 Parity NONE NONE, EVEN, ODD
SW7-5 Flow Control XON/XOFF DTR/DSR, XON/XOFF
SW7-6 DMA Control Valid Valid, Invalid
SW7-7
VCom Protocol
PC Setting PC Setting, DTR/DSR, XON/XOFF
Memory SW8-1 Print Width 576 dots 360 dots, 384 dots, 420 dots, 432 dots, 436 dots,
512 dots, 576 dots, 640 dots
SW8-2 Paper Type 1 Color Normal 1 Color Normal, 1 Color BM, 1 Color Label,
2 Color Normal, 2 Color BM
Memory SW9-1 Code Page PC437 PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/PC864/
Thai Code 18
Memory SW9-2 International USA USA, France, Germany, England, Denmark,
Character Set Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea
Memory SW9-3* Kanji OFF ON, OFF
SW9-4* JIS/Shift JIS JIS JIS, Shift JIS
Memory SW10-1 Print Density 130% 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
SW10-2 Print Speed Level 9 Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
SW10-3 ACK Timing Before Busy Before Busy, Same Period, After Busy
* In this printer, Memory Switches 9-3 and 9-4 are not usable.
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of
three actions: pressing the FEED button, pressing and holding the FEED button,
and opening or closing the printer cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED
button pressed and held, turn the printer power on, and then press the
FEED button twice. Close the cover. If the current settings of the memory
switch etc. are printed, the printer is now in the memory switch setting
mode.
Memory SW (1) 00000000
0: OFF state
1: ON state
(No indication for 0/1 with memory switch 7-10)