Filter
Top Products
— 5 —
PRECAUTIONS IN HANDLING THE PRINTER
Please observe the following precautions for Powered USB cable.:
■ Do not plug or unplug the Powered USB cable with a wet hand.
■ Use the Powered USB cable only at the specified POS unit.
■ Do not use a deformed or damaged the Powered USB cable.
■ Do not move the printer while the printer power is on.
• Neglecting to handle properly may result in printer failure, emission
of smoke, fire, or electric shock.
• An overload may cause the power cord to overheat or fire or the circuit
breaker to trip.
■ Do not allow anything to rest on the power cord. Do not place the
printer where the power cord will be trampled on.
■ Do not use or carry the printer with its power cord bent, twisted, or
pulled.
■ Do not attempt to modify the power cord unnecessarily.
■ Do not lay the Powered USB cable in the neighbor of a heating device.
• Neglecting these cautions may cause wires or insulation to break,
which could result in leakage, electric shock, or printer failure. If the
Powered USB cable sustains damage, contact your distributor.
■ If the printer will not be used for a long time, pull out the Powered
USB cable.
■ Plug or unplug the power cord or signal cable after turning off the
printer and the appliance connected to the printer.
WARNING