Fujitsu M200 Computer Hardware User Manual


 
CHAPTER 5 M400R Main Cabinet
Example for normal operation
=== Memory ===================
Type : SDRAM
SLOT# Size [ Valid (MB) / Existing (MB) ] Total
00- 0- 3 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
00- 4- 7 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
00- 8-11 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
00-12-15 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 0- 3 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 4- 7 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 8-11 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01-12-15 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
* = Error SLOT
Example of a slot #4 error
=== Memory ===================
Type : SDRAM
SLOT# Size [ Valid (MB) / Existing (MB) ] Total
00- 0- 3 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
00- 4- 7 0 / 0* 0 / 256 0 / 256 0 / 256 : 0 / 768 MB
00- 8-11 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
00-12-15 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 0- 3 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 4- 7 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01- 8-11 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
01-12-15 256 / 256 256 / 256 256 / 256 256 / 256 : 1024 / 1024 MB
* = Error SLOT
Note: If a memory error is detected, an asterisk is displayed in the Size field for the
corresponding slot. In this example, an error in slot #4 is detected in the initial
diagnostics operation. Modules in slots 5 to 7 are recognized as normal modules but
also become invalid.
5.4 Disk Units
Disk drive configuration
Up to 2 disk drives can be installed in the base configuration of the M400R main cabinet. To install
more than 3 disk drive units, the Expansion File Unit Type-2 must also installed.
60