Filter
Top Products
PC Specialist's Handbook ErgoPro m664-series
Edition 1 - Release 1 - March 1998 Page 6-7
Video memory upgrades
Video controller Memory on the
graphics board
Memory upgrade
module
Kit code for the
upgrade module
Total video
memory
ATI Xpert@Work
4 MB (SGRAM) 4 MB (SGRAM) PL060611
(1
8MB (SGRAM)
ATI 3D Charger
2 MB (EDO) 2 MB (EDO) PL060612
(2
4 MB (EDO)
(1
Video memory upgrade kit for ATI Xpert@Work consists one 4 MB, 100 MHz SGRAM SO-DIMM module
(2
Video memory upgrade kit for ATI 3D Charger consists two 2 MB, 40 ns EDO RAM modules
Ethernet subsystem
The system board has no on-board LAN. For the add-on board LAN with WOL features, there is a three pin
Wake On LAN header on the system board.
Audio
The system board has no on-board audio.
There is one option available, i.e Creative Vibra 16XV, PnP ISA add-on board. It is based on the CT2511 single
chip 16-bit stereo codec controller (Sound Blaster). It fulfills requirements of PnP, Microsoft’s PC97, Sound
Blaster and APM compatibility. . In addition to SB Audio, the CT2511 contains a CQM Music Synthesizer and an
MPU-401 MIDI functions. The maximum audio sample frequency is 48 kHz, 8/16-bits per channel.
Main functions:
· Sound Blaster 2.0 and Sound Blaster 16 compatible
· ISA 16-bit I/O addressing
· Full Duplex operations (16-bit data for recording and playback)
· Type F DMA
· MPC 2 and 3 compliant
· Microsoft PC97 compliant
· PnP support
· APM 1.2 support
Audio connectors on the system units (optional, only with integrated on-board audio):
· On the adapter: Microphone Input (mono), Input (stereo), Output (stereo), MIDI/Joystick
· On the system board: CD audio, Telephony
Creative ViBRA 16XV PnP Resources:
Device 0 (PnP ID = CTL0043)
IRQ DMA I/O (hex)
SB 220-22F, 240-24F, 260-26F, 280-28F
CQM (Adlib) 388-38B, 38C-38F, 390-393, 394-
397
MPU-401 UART 300-301, 310-311, 320-321, 330-331
SB 5, 7, 9, 10
SB 0, 1, 3
Device 1 (PnP ID = CTL7005) IRQ DMA I/O (hex)
Gameport 200 - 20F (201)
Default values are shown as Bold Italic