Filter
Top Products
Parameter Data Format
f. Pre-Scan Timeout Value
This parameter specifies the maximum time, in hours, for a pre-scan operation
to complete. If the pre-scan operation does not complete within the specified
time then it is halted. A value of zero specifies an unlimited timeout value.
g. Minimum IDLE TIME before Background Scan
Displays the time from IDLE status to start of BMS (unit: milliseconds).
HDD ignors the values specified for this parameter and operates in
accordance with the default value.
h. Maximum TIME to suspend Background Scan
Displays the maximum amount of time required until the execution of a
command (unit: milliseconds) when a command is received during BMS
operation. HDD ignores the value specified for this parameter and operates in
accordance with the default value.
324 C141-C013